FIGURES, CHARTS, AND TABLES IN THE ISD SERIES DATA SHEET . ISD Series Device Pin/Pad Designations, with Respect to Die Center (µm). ISDMP Datasheet, ISD SPI Interface Record and Playback IC Datasheet, buy ISDMP Voice Record IC. ISDMP datasheet, ISDMP circuit, ISDMP data sheet: WINBOND – Single-Chip Voice Record/Playback Devices 8-, , , and.
Care should be taken such that the data shifted in is compatible with current system operation possible to read interrupt data and start a new operation at the same time Oct 31, – 1 – Revision 1. Memory Architecture The ISD series contains a total of 3,K Flash memory cells, which is organized as 2, rows of 1, cells each.
Stresses above those listed may cause permanent damage to the device. Remove the leaded package option Remove the extended temperature option Update the external clock description Revise Ordering Information section 1.
ISD Datasheet PDF –
Oct 31, Revision Functional operation is not implied at these conditions. All other trademarks are the property of their respective owners. In this mode, the messages are skipped 1, times faster than the normal playback mode. Playback and record operations are initiated when the device is enabled by asserting the SS pin LOW, shifting in an opcode and an address data to the ISD device refer to the Opcode Summary in the following page.
If the XCLK is not used, this input must be connected to ground. The address bits A0-A15 are used to access various rows for multiple messages of different durations. The CMOS-based devices include an on-chip oscillator, anti-aliasing filter, smoothing filter, AutoMute feature, audio amplifier, and high density multilevel Flash memory array.
This is the serial output of the ISD device In addition, the device can be re- recorded typically overtimes. The ISD series is designed to be used in a microprocessor- or microcontroller-based system.
Oct 31, – 4 – Revision 1. Oct 31, Revision 1. Refer to the AC timing table for other T to different sampling rates.
Copy your embed code and put on your site: Oct 31, – 2 – Revision 1. Otherwise the ISD will repeat the operation from the same row address.
The duty cycle on the input clock is not datasueet, as the clock is immediately divided by two. When a record command is sent, T  Measured with AutoMute feature disabled.
Exposure to the absolute maximum ratings may affect device reliability and performance. Message Ied4004 can be selected only at the beginning of a playback operation.
ISD datasheet, Pinout ,application circuits ISD Series ChipCorder
This is the serial input to the ISD device when it is configured as slave. Download datasheet Kb Share datazheet page. To minimize noises, the analog and digital circuits in the ISD devices use separate power busses.
In addition, these supplies should be decoupled as close to the package as possible.