Eheim – Professional II Canister Filters. Comment. I have been operating two ‘s for six years and one for the past four years and love how simple the . Eheim Double Tap Unit Sealing Ring Set for /// – 2 pk ( ). Quantity. USD Eheim Pro II Canister Filter Parts, Eheim Double. LTWHOME Replacement Blue Coarse and White Fine Filter Pads Sets Fit for Eheim Professional Pro 2 // / and Experience
Hopefully there wasn’t too much air in there and having it run for an hour might be burning the motor up. It was working for mins before work and when I left it was going strong.
Turn it on then and that should solve the problem Thanks for the help guys. Renee’ Today I’m feeling: My final suggestion was going to be if the hoses were around the wrong way.
If these are not on properly, particularly on the input end, you can also “suck air” into the system. I believe that’s part of the priming process. I tried to re-lube the canister o-ring thing they tell you to do in the manuel.
Eheim Professional II Canister Filters – Product Reviews at The Age of Aquariums – Tropical Fish
Eheim pro II peofesional The approach explained in the following thread worked for me http: It was making a bit more noise than I thought it should but figured it was just working the air out. I have no idea whats going on.
Eheim pro II problems Are you sure it is primed properly. So if it’s not doing that, I suspect it’s not primed properly.
Results 1 to 11 of However, after an hour or so its making a ton of noise. I just read that you said the top was hot First, the unit is not sealed completely and rather than dripping, it’s sucking in air.
As you get more used to them, priming becomes easier too. Home and Living You Talking to Me?
Then fill the output tube. The thing i dont get is both tubes and canister will b filled. I turn it back on prime it again, and this time after about 30 mins it still sucks in water but will not push any of the water out, and it causes the top of the canister to get very hot.
Crossing my fingers by the time i get back home today it will still be going. All times are GMT It sounds like you didn’t get all of the air out before turning it on. Some of the hardware “elbows” that come with some Eheim models have fill caps. Eheim pro II problems Mine will not work unless both hoses are filled. If, after doing this, it proefsional works for a bit then stops there are a couple of possibilities. Eheim pro Profesionxl problems Glad problem is solved.
And, obviously, airstone below intakes are a bad idea. I have found out since though, that if you re-lube the workings of the self priming thing, this helps. The time now is If all these don’t work, then I am stumped. Hope you get it started. The motor got hot too, because it was running dry.
Last edited by FLGirl; at I go to check it out and in doing so it just shuts off.