Compact vector control drive v class three-phase input 0. Follow these steps to connect or disconnect the fibers to or from the E3X-NH Press down the Fiber Cutter in a single stroke to cut the fiber.
The mounting bracket can be at- indicators tached to this side. Threshold Indicators red, 13 levels Indicates threshold level. Comments to this Manuals Your Name.
Omron E3X-NH41 (E3XNH41)
Add to my manuals Add. Polyvinyl chloride-covered cord 4-mm dia. Don’t have an account? We recommend that two-point teaching and manual-tuning be tried first. Incident Level Indicators green, 8 levels Lit depending on the incident light amount. Finished state proper cutting state Approx. Press the SET button without target in the sensing area. The Fiber Units have a withstand force of 9. After setting the sensitivity of the E3X-NH, select the adjust- are lit. Do not pull or press the Fiber Units.
By pressing ‘print’ button you will print only current page. Page 12 Insert a fiber into the Fiber Cutter and determine the length of the fiber to be cut. Don’t show me this message again. Page of 16 Go. Got it, continue to print. The ultimate fiber amplifier for maximum ease of use and high performance 37 pages.
Ultrasonic sensor with separated digital amplifier amplifier unit 18 pages. SET Button For teaching or for fine threshold ad Be sure that all the threshold indicators red 1. One-point Teach Mode The threshold indicator red will flash.
Insert a fiber into the Fiber Cutter and determine the length of the fiber to be cut.
Page 10 After the threshold has been compensated, the Threshold Indicator will flash, indicating the adjusted value. To secure the Protective Spiral Tube at a position other than the end cap, apply tape to the tube so that the portion Applications e3x-nh411 thicker in diameter. To print the manual completely, please, download it.
Connection Washers 6 dia. Insert the fiber in the direction indicated by the arrow.
E3X-NH41 Omron | Ciiva
After the threshold has been compensated, the Threshold Indicator will flash, indicating the adjusted value. Automatic or manual fine threshold adjustment 13 levels. Page 7 Be sure that all the threshold indicators red 1. Enter text from picture: Before pulling out the fiber, e3x-nh441 MUST first press the lock EF11 Sleeve Bender button to release unlock the fiber, or you may damage The bending radius of the stainless tube should be as large as the fiber.
The built-in buzzer will 1. Press the SET button once without a target object in the Change the position of the object and the sensing distance sensing area.