Page 1. Page 2. Page 3. Page 4. Page 5. Page 6. Page 7. Page 8. Page 9. Page Page Page Page Page Page Page Page Page your installer instruct you on system operation and on which features have Your security system is made up of a DSC PC or PC control panel, one or from having to manually bypass interior zones each time they wish to arm. Read this manual carefully and have your installer instruct you on system Your security system is made up of a DSC PC or PC control panel, one or.
The smoke detectors may have been improperly installed Please Read Carefully or positioned. By pressing ‘print’ button you will print only current page. Don’t have an account?
Page inatallation Ready light ON dac System is ready for arming. Add to my manuals Add. Enter text from picture: Ready light ON – System is ready for arming. Page 8 [P] Panic Holding this key down for two seconds causes a steady tone on your siren or bell if your installer has programmed this key for audible operation. Don’t show me this message again.
Page 10 Maintenance With normal use, the system requires minimum maintenance.
DSC PC INSTALLATION MANUAL Pdf Download.
The Master Code will be supplied to you by your installer. Printed in Canada R Maintenance With normal use, the system requires minimum maintenance. Enter a valid access code to silence the alarm.
To print the manual completely, please, download it. The following points should be observed. The entire manual should be carefully read. This manual also for: Master Code The 4 digit Master Code is used to arm and disarm the security system, to program additional security codes and to change other system features. An auxiliary warning device is also activated if your installer has connected it to your system.
Press [ ] to return to Ready. PcPc – rev8Pc – rev8. The control panel will be mounted out of the way in a utility closet or in a basement.
The installztion memory will automatically be displayed when the system is disarmed See Disarming the System. All keypad entries are made by pressing one key at a time. Entry Delay Off Arming If you wish pc15000 arm your system and eliminate the entry delay, enter [ ] before your access code. Changes or modifications not expressly approved by Digital Security Controls Ltd.
Press [ ] then  to display the zone which caused the alarm.
PC – PC Security Products | DSC
Got it, continue to print. The metal cabinet contains the system electronics, fuses and stand-by battery. Light dusting with a barely damp cloth should remove normal installattion of dust. Page 3 Master Code The 4 digit Master Code is used to arm and disarm the security system, to program additional security codes and to change other system features. Comments to this Manuals Your Name. This manual contains information on. Page of 16 Go. Be sure to remove snow from exterior patio doors in winter; outdoor furniture or equipment should not block exits.
Page 4 Entry Delay Off Arming If you wish to arm your system and eliminate the entry delay, enter [ ] before your access code. Smoke may not be able to reach the smoke detec- tors, such as when the fire is in a chimney, walls or roofs, or on Note to Installers the other instwllation of closed doors.
An entry through any zone programmed as a delay zone will create an instant alarm. Do not wash the keypad with a wet cloth.
Memory Bypass Armed light will come ON indicating the system is armed.