At page 39 of the MicroBook User Manual I read that “For complete information about CueMix FX, refer to the CueMix Fx PDF manual, which is. MOTU MicroBook Manual Online: Cuemix Fx, A bus Mixer With Eq And Compression, Cuemix Fx Versus Host Mixing. CHAPTER 7 OVERVIEW CueMix FX Is. MOTU Audio Express Manual Online: Cuemix Fx, Advantages Over Host-based Mixing And Processing, Cuemix Fx Installation, Cuemix Fx Basic Operation.
Three separate tabs show inputs, mix busses and outputs. Signal activity of all inputs, busses and outputs can be monitored via the meters pane. This means you can program your mixes with the CueMix FX software in the studio and then take your MOTU interface on the road as a stand-alone digital mixer.
CueMix FX is a completely new software front-end with attractive graphic mixing, graphic editing of parametric EQ and a convenient tabbed interface for quick access to all mixing features, digitally controlled trims and other settings in your MOTU FireWire audio interface. And the Oscar goes to From big screen to home studio: Your MOTU audio interface supports up to eight separate stereo mixes seven for the UltraLite-mk3 assigned to any digital or analog output pairs.
Talkback allows an engineer in the control room to temporarily dim all audio and talk to musicians in the live room. Two channels can be grouped to a single fader for stereo operation.
CueMix FX is a software front-end with attractive graphic mixing, graphic editing of EQ and a convenient tabbed interface. Width mode collapses the stereo image to mono by adjusting the relative pans of each channel gradually to center. You can also combine the spectrogram with the FFT display and EQ curve in the same display, or separate them to view them individually but simultaneously.
Balance mode works much like a normal stereo balance control, one channel fades in and the other fades out. But EQ manul dynamics settings can also be edited on all channels in line within each channel stripwhere you can compare critical settings side-by-side, as shown below. There kanual also a section for talkback and listenback. Two stereo panning modes are available: CueMix FX can be operated side by side with any host audio software for Mac or Windows, and it can be controlled from the Mackie Control Universal Pro automated worksurface.
You can expand the spectrogram to fill the entire resizable CueMix FX on-screen window. Click the “Focus” button on any channel or bus to edit its settings in the area on the right-hand side, which provides separate tabs for graphic editing of parametric EQ, compression and other effects.
The Mnual FX flexible effects architecture allows you to apply EQ and compression on every input and output up to 58 channels, depending on your interfacewith enough DSP resources for at least one band of parametric EQ and compression on every channel at 48 kHz. CueMix FX gives you comprehensive graphic control over your mix.
– CueMix FX software
CueMix FX also provides real-time spectrogram “waterfall” display that provides rich, detailed visual information about the frequency content of any signal or mix. All of the maual features described on these pages except for the signal analysis tools mentioned above are available during stand-alone operation, and all of them can be accessed from the front panel LCD.
Conversely, Listenback allows musicians to talk to the control room. Each channel strip displays a graphic thumbnail of EQ curves, compressor settings and other channel specific parameters.
Each mix can support all inputs analog and digital. For Listenback, cuemiz can use one of the recording mics in the live room or you can set up a dedicated listenback mic for the musicians and connect it to a spare mic input.
Tweak your mix on location from the front panel. You can even use the effects without a computer connected. Traveler-mk3 — Portable bus-powered audio interface with effects and mixing.
CueMix FX provides an optional real-time FFT display super-imposed on top of the graphic EQ curve so you can see as well as hear the effect of mnaual equalization adjustments. For Talkback, you can set up a dedicated mic in your control room and connect it to a mic input on your interface.
The tabs shown above let you focus on one channel at a time and edit its settings using the high-resolution graphic display. Family Guy composer Walter Murphy shares his process. In addition to the meters present on individual channels, a high-resolution meter and output bus activity associated with that channel can be displayed in the primary status window.