Colours. White. Colour Resistance as per German BFS-Merkblatt (Data Sheet) No. Binder: Class B Pigmentation: Group 1. Colour Resistance according to BFS Data [ ] Sheet No. Binder: Class B. Farbtonbeständigkeit gemäß BFS-Merkblatt [ ] Nr. . E3, – μm. Colour fastness according to BFS-Merkblatt (BFS. Leaflet) No. B Consumption: Per coating: approx. – ml/m² (for levelling paint).
In case ,erkblatt moist weather conditions rain, dew, fog yellowish transparent traces of additives, showing a slightly glossy shine and stickiness, may occur on the surface of compact, cool substrates or by means of delayed drying caused by the weather.
Clean utensils immediately after use with soap and water. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. May produce an allergic reaction.
Technical Assistance As it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries. Protected against algal and fungal attack. Do not apply on horizontal surfaces exposed to rain or moisture. Do not empty into drains, water courses or into the ground.
Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. German committee dealing with paint and protection of real properties Gloss Level Matt flat G 3 Storage Keep in a cool, but frost-free place. Applicable on mineral and synthetic organic renders, coated or uncoated. Prime chalking, sanding, absorbent surfaces with AmphiSilan-Putzfestiger.
Use P2 dust filter for grinding. Tintable in numerous colours via ColorExpress. Repair small defects with fine filler Caparol Fassaden-Feinspachtel, deeper damages up to 20 mm preferably with Histolith-Renovierspachtel and prime repaired areas subsequently.
In case of contact with eyes or skin, immediately and thoroughly rinse with water.
New Coatings of Silicate Finish Render: Apply by brush or paint roller only. Substrate Preparation Iron, Steel: Only frost resistant fair faced bricks, free of foreign inclusions that leave marks, e. Resistant to common household cleaning agents detergents. Do not eat, drink or smoke while using the paint. May produce an allergic reaction.
Clean with sanding pad and Multistar, 1: Disposal Materials and merkb,att related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Copper ions in draining rain water run-off water may react with ingredients of ThermoSan NQG and may cause a brownish discolouration. Contains 1,2-benzisothiazol-3 2H -one, 2-methyl-2H-isothiazolone. Ensure good ventilation during use and drying.
Prime in accordance with Technical Information No.
Reduces visible marks on dark colours, if surfaces are subjected to mechanical loads. Avoid release to the environment. Method of Application Guidelines for Spray Application: This product contains max. Corrosion protection for iron and merklatt. If brownish discolouration occurs in the intermediate coat, recoat with solvent-based facade paint Duparol. Apply one priming coat of AmphiSilan-Tiefgrund. In case of direct reworking, medkblatt traces of additives must be pre-wetted and completely removed after a short reaction time.
Method of Application Guidelines for Spray Application: Customer Service Centre Tel.: On large, seamless areas a “clouding” effect may occur with spray coating and is sometimes unavoidable, due to sectioning surfaces in several operation segments.
Jointing must be free of cracks.
Carefully remove all unstable coatings. Unheated buildings, facilitating condensation, e. Inapplicable on anodized aluminium and roofings.
Capalac Aqua Metallschutz
Group 1 to 3, depending on the colour. Disposal Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Adhesion must be tested in advance for powder coatings, coil coatings and other critical substrates by trials.
Clean existing renders by suitable wet cleaning method. PU-AlkydGeo High-class aqueous polyurethane alkyd lacquer white enamel for exterior and interior use. Do not allow product to enter drains, waterways or soil. Prime highly sanding, chalking renders with AmphiSilan-Putzfestiger. Keep cans tightly closed. Allow wet cleaned surfaces to dry thoroughly before further treatment.
Always use tinted paint of same batch, when applying on seamless surfaces.
Capalac Aqua Metallschutz: Caparol
On rough surfaces and consumption are correspondingly higher. Apply with a textured, short pile polyamide nylon roller and treat immediately with a fine-porous foam roller or special brush for aqueous enamels. Advice for allergy sufferers with isothiazolinone allergy: