Gd8 lg-9c intel pentium 4 system board socket 72 pages. Page of 24 Go. Make sure to configure the “Master” and “Slave” relation before connecting two drives by one single ribbon cable. DO NOT place jumper caps on these connectors.
SATA device and connect the other end from the power supply. Table Of Contents Contents 1. Locate all the screw holes on the motherboard and the chassis base.
User manual ABIT LGC – Download your ABIT LGC user guide or user manual
By pressing ‘print’ button you will print only current page. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these connectors.
Connecting Peripheral Devices 2. Connect the single end blue connector at the longer length of ribbon cable to the IDE port of this board, the other lb-95c ends gray and black connector at the shorter length of the ribbon cable to the connectors of your hard drives. Yes, we highly recommend abig you clear the CMOS before installing a new motherboard. Click to enter the driver installation menu. Nevertheless, this backup battery exhausts after some five years.
Power off the system and disconnect with AC power source. Connects to the surround left and surround right channel. This lg-9c5 also for: Type in the brand and model name of your power supply unit.
No part of this mznual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual. Type in the BIOS version of your motherboard. Lastmanuals, for instance, does not offer a translation service. Motherboard socket intel core 2 duo, pentium extreme editon, pentium d, pentium 4 pages. Page of 40 Go. Don’t have an account?
Download the complete user guide Ko.
In any way can’t Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description.
Don’t show me this message again. Lg series, lp series intel pentium 4 system board socket 40 pages. Table of Contents Add to my manuals Add. Connecting Chassis Components 1. This manual also for: Plug in the AC power cord only after you have carefully checked everything. Type in the power wattage of your power supply unit. Comments to this Manuals Your Name. Type in the ly-95c and model name of your graphics card. Don’t have an account?
Yes, we highly recommend that you clear mannual CMOS before installing a new motherboard. Illustrate the over-clocking status if you had done so. Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners.
Page 2 No part of this manual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual.
Detailed instructions for use are in the User’s Guide. The motherboard in this photo is served for DEMO only, and may not be the same type or model as the one described bait this manual.
Connects to printer or other devices that support this communication protocol. Checking Jumper Settings 1. Search for a user manual.
Fan Power Connectors 1. To install this motherboard: A maximum 20 cycles of CPU installation is recommended. Only when these two methods fail should you agit the system by powering it off and then back on.
Motherboard socket intel core 2 duo intel pentium 4 intel pentium d 80 pages. Rotate the fastener clock-wise to lock the heatsink and fan assembly into position. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product.