HGV-B Uverse Router Userguide – Scribd Uverse router manual AT&T U- Verse uses a CO That way your connection speed, modem, and router info. for HGV-B. Do you still have questions concerning the router that you can’t find online? You can always try the manuals. NETGEAR Nighthawk X6S AC Tri-band Gigabit WiFi Router with MU-MIMO (RP). EA. 8. Free delivery by Sun Dec 16 GMT (PST).
When it is temporarily displayed in menu bars immediately after rouger from a DSL configurationit will not contain Editing Address Allocation Settings. Enable Public Network Mode Step 1: Default factory settings for 2Wire HGV-B If you have performed a reset of your HGV-B device or not changed the defaults, you should be able to access it with the following settings: Firewall – Settings Page Access the Management and Diagnostic Console Firewall – Settings Page The Firewall – Settings page allows you to configure the firewall to pass through specific application data to a selected computer.
The 2Wire gateway then uses this external address to communicate with the Internet on behalf of devices connected to the local network. Unsolicited inbound traffic is not allowed to pass through the firewall. Noise margin in dB at the start of the connection.
Vertical orientation is the preferred uaer for mounting the HGV-B gateway. Access the Management and Diagnostic Console Item Description Maximum rate achievable at the time of the initial connec- tion based on the quality of the line specifically, the uncapped rate.
Allocate Public IP Addresses to Technical support representatives use this information to help troubleshoot problems with your broadband connection. The following table describes how to interpret the indicator lights.
Setting a System Password. Access the Management and Diagnostic Rputer Troubleshooting – Upgrade History Page The Upgrade History page shows a log of all system software upgrades, and lists uverde upgrades in the order in which they occurred. This feature provides a quick and easy way to allow specific types of unsolicited traffic through the HGV-B firewall. Page 77 Configuring Mulitple Static IP Addresses To allow all traffic for the web server, configure the gateway to allow the specific type of the associated inbound ports to flow to the server.
Local Network – Status Page The range of IP addresses available on the network, the number of addresses allocated, and the number of addresses remaining. Non-2Wire Wireless Adapter 3800htv-b. Troubleshooting – Upgrade History Page Access the Management and Diagnostic Console Troubleshooting – Upgrade History Page The Upgrade History page shows a log of all system software upgrades, and lists the upgrades in the order in which they occurred.
The information displayed varies depending on whether the broadband connection is via Page 68 Upgrade the Software After the gateway reboots, the Conexant firmware is upgraded.
The information displayed depends on the huide of broadband service you have and your gateway model. Comments to this Manuals Your Name.
Other scenarios where you might want to reset your router is if you’ve forgotten the password or misconfigured it and can’t get access anymore. For details on configuring wireless settings, refer to page To change your wireless settings, click the button.
Non-2wire Wireless Adapter Configuration. To disable a network device, click the button.
It has many of the features of an advanced broadband router as well as some additional features. If a password has been set, you must enter it before you can access HGV-B configuration pages. Broadband Link Pages Viewing Your Broadband Link Summary The Broadband Link Summary page provides general information about the current status of your broadband link connection and your system configuration. Connect the Broadband Interface. Using Broadband Link Advanced Settings.
Connect the Broadband Interface Now that you have completed the Power and LAN connections, it is time to connect to the broadband interface.
Installation Requirements Before you begin installation, review the HGV-B package contents and ensure that you have available the items shown in Figure 2 Figure 2. There are some applications and devices that require the use of specific data ports through the firewall. Advanced – Syslog Settings Page Advanced – Syslog Settings Page The Advanced – Syslog Settings page allows users to maintain a history of events greater than the capacity of the 2Wire gateway by enabling a syslog server.
Monitoring Your Wireless Settings. Following are some of the major features of the 2Wire gateway. The gateway allows users to open the necessary ports through the firewall using the Firewall Settings page. Most of the values displayed on this page are calculated once at the start of the connection.
If you have performed a reset of your HGV-B device or not changed the defaults, you should be able to access it with the following settings:. Gateway User Interface Viewing System Details The System Details page provides information about your gateway, any enhanced services you may have, and provides a link that you can use to restart your system. It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.
To print the manual completely, please, download it. Configuring Mulitple Static IP Addresses If you did not receive a subnet mask from your ISPbut were provided with a number of addresses has been, you can look up the associated subnet mask in the table below. That is, except for traffic sent to the