2P4M Datasheet, 2P4M 2A V Thyristor Datasheet, buy 2P4M. 2P4M datasheet, 2P4M circuit, 2P4M data sheet: NEC – 2A PLASTIC MOLDED THYRISTOR,alldatasheet, datasheet, Datasheet search site for Electronic. 2P4M from NEC Corporation. Find the PDF Datasheet, Specifications and Distributor Information.
After button 22p4m is released the device will again block the forward DC voltage and will wait for the gate pulse. So when B1 is pressed at a time T1 as shown in graph, SCR starts conducting and a voltage appears across the load as shown in the graph.
2P4M Datasheet(PDF) – Inchange Semiconductor Company Limited
First understanding datasheeet working let us consider a simple application circuit for the device as shown in the circuit diagram below.
This way we have used the SCR as a switching device and in a similar way we can use in other applications.
Since the power supply is DC the SCR which was triggered ON will stay in conduction mode even after the datzsheet voltage is removed after the device starts conducting. This is due to the characteristics of the device as a SCR. Submitted by admin on 24 November Now for recovering the SCR to its high resistance state the current flow though the device must be brought to zero for fraction of second.
And to drop the current through the loop to zero we will press button B2. TL — Programmable Reference Voltage. In addition Button 2 will be close by default and will break the circuit once datazheet is pressed. As shown in graph the voltage appears across load after second trigger and this cycle of triggering and breaking continuous.
2P4M Datasheet(PDF) – NEC
As show in graph once the button B2 is pressed the voltage across the load will become zero due to the loop break and the device will start recovering. 24m to use 2P4M SCR First understanding the working let us consider a simple application circuit for the device as shown in the circuit diagram below.
This state continuous until a voltage pulse is give to the gate of the device and this is possible when button B1 is pressed. Also in circuit, device Anode is connected to load and cathode is connected to second end of power source. At initial 2pp4m button B1 will be not pressed and in gate voltage absence SCR will be in non-conductive state.
Once this button is pressed the circuit loop will break and current flow though the device will become zero. Once the current dahasheet cutoff the charge stored in the device will dissipate and it will recover to its initial forward blocking state.
Here V1 is the DC voltage source, a resistor type load is connected in series with SCR and Vg is the trigger voltage at the gate of the device. The device is designed to have highly sensitive trigger levels and is suitable for applications where available gate currents are limited.
So until the button B1 is pressed again the load voltage will be zero. So under no trigger to the gate of the SCR datashet.